Home > Flat Roof Materials > Fibreglass
Product Code: a200drip
Availability:
The A type trim is a drip trim, fitted to the lowest edge of the roof usually where the rainwater flows into the gutter.
The A200 is compatible with the B260 upstand trim.
Dimensions
Girth: 200mm; Depth: 90mm; Length: 3metres
Fitting Instructions
Two support battens should be fixed to the perimeter of the roof to provide space for the gutter to fit behind the trim, with the outer batten attached 10mm lower than the inner batten to allow the trim to sit flush with the roof.
Apply trim adhesive to the batten in 30mm beads at 300mm centres, rub the trim into place and nail to the decking. Do not nail through the front of the trim. If the pitch of the roof is only minimal, rainwater is likely to hold behind the trim. A planning machine can be used to take 2mm off the deck to allow the trim to lay flush with the board.
Products ordered from our online store are delivered from Monday - Friday each week, except for Bank Holidays. We aim to have all orders that leave our store delivered to you within 2 working days. Please note that some products may have specific lead times, which may affect the time it takes to receive your order.
We offer nationwide delivery anywhere in Ireland.
Small shipments
Parcel (Max 20kg):
Large shipments (pallets):
A250 Drip Trim 3M€20.00
B260 Raised Edge Trim 3M€17.95
C100 Simulated Lead Flashing Trim 3M€17.95
RoofNStop Now Stocking Paslode05/04/2024
RoofNStop Partners with EternaBond16/02/2024
Roofing Safety Tips for Contractors21/01/2023
RoofNStop Introduces KimaAir to Ireland19/06/2022
Maris Polymers MARISEAL Application Guide17/12/2019