FlexiPoint is designed to cope with the European temperature fluctuations and cold conditions
FlexiPoint is made from carefully blended resins, adhesives and polymers to give it exceptional bonding strength as well as flexibility this is done under strict controlled conditions to ensure the quality of FlexiPoint.
With a leading-edge development team dedicated to technical innovation and by exploiting the very latest technologies in polymer-resin based compounds FlexiPoint is the market leader in the UK.
The Science Behind FlexiPoint
FlexiPoint is manufactured in the UK and is designed to cope with the European temperature fluctuations and cold conditions
FlexiPoint is made from carefully blended resins, adhesives and polymers to give it exceptional bonding strength as well as flexibility this is done under strict controlled conditions to ensure the quality of FlexiPoint.
We select only the best quality polymers, resins and adhesives to guarantee top quality performance every time.
With a leading-edge development team dedicated to technical innovation and by exploiting the very latest technologies in polymer-resin based compounds FlexiPoint is the market leader in the UK.
Four Step Guide
1) Bedding cement should be struck off at 90 degrees and free of large holes and voids, ensuring no bedding cement residue is left on the edge of the ridge cap. FlexiPoint should be applied at least 12 hours after bedding is laid.
2) Use FlexiPoint straight from the container, there's nothing to add, just stir before using to freshen up the compound. Using a steel pointing trowel, apply the FlexiPoint to the bedding valleys and verges (where required).
3) FlexiPoint should be trowelled on at a uniform thickness of 3mm to 5mm using the FlexiPoint primer supplied.
4) Smooth off the FlexiPoint to beautiful steeled finish for a professional appearance. Always remember to smooth off as you go. A plastic spray bottle with water in it can also be used to achieve a smooth finish especially in the summer months . ONLY APPLY A FINE MIST SPRAY ONE OR TWO SQUIRTS on the freshly pointed FlexiPoint then trowel over to achieve a smooth finish then move on to the next section.
The FlexiPoint "No Crack" Guarantee
FlexiPoint guarantees that for a period of ten (10) years from the date of purchase (the “Guarantee Period”) the product will sustain normally occurring structural movement and will not crack or break away from the foundation.
Our response to a guarantee claim:
Where a breach of this guarantee is established to the satisfaction of FlexiPoint, RoofNStop will replace the product free of charge.
Guarantee subject to the following conditions:
This specific guarantee is only available to qualified roof tilers and stone masons who must be certified FlexiPoint applicators.
The product must be used strictly in accordance with the application instructions printed on the packaging, and be used for the purposes intended by the manufacturer.
Any work carried out involving the use of the product must be undertaken in accordance with accepted trade practice.
No claims may be made under this guarantee where product failure is caused by:
Any defects in the design of your roof or supporting structures, or the actions of any third person, or Any extraneous circumstances beyond our control which the product could not reasonably be expected to withstand.
FlexiPoint’s liability in respect of the product is limited to the remedies set out in this guarantee. Method of application is beyond our control.
Approx. Quantities Needed
Here are some approximate quantities to help you calculate how many containers of FlexiPoint you would require for your house. Each container contains 10kg of FlexiPoint and FlexiPoint Primer.
RIDGES: 1 container for every 25 ridge tiles
VALLEYS: 1 container for every 2 valleys
VERGES: 1 container for every 2 verges
